| RP-3 | |
|---|---|
| Role | Glider |
| National origin | United States |
| Manufacturer | Rensselaer Polytechnic Institute |
| Designer | Brian E. Thompson |
| Introduction | 1998 |
| Status | Sole example on display in the New York State Museum |
| Number built | one |
The Rensselaer RP-3 (for Rensselaer Polytechnic design 3) is an American mid-wing, T-tailed single-seat, glider that was designed by Brian E. Thompson and produced by the Rensselaer Polytechnic Institute of Troy, New York.[1][2]
Contents |
The RP-3 was the third aircraft design in Rensselaer's Composite Aircraft Program and was completed in 1998.[1][2]
The aircraft is of composite construction. Its 54 ft (16.5 m) span wing employs a Wortmann FX-67-K170/17 airfoil and features split flaps. The landing gear is a retractable monowheel, with an auxiliary tailwheel. The aircraft is considerably larger and heavier than its predecessors, the RP-1 and RP-2, with an empty weight of 650 lb (295 kg) and a gross weight of 1,000 lb (454 kg). Despite its large wingspan the RP-3 achieved only a 32:1 glide ratio.[1][3]
Only one RP-3 was built and it was registered with the Federal Aviation Administration in the Experimental - Amateur-built category.[1]
Data from Sailplane Directory[1]
General characteristics
Performance
|
|||||
|
||||||||||||||